Part#: VN5T016AHTR-E
Part Category: Interface ICs

Manufacturer: STMicroelectronics, Inc.

Description: Buffer/Inverter Based Peripheral Driver,…

The VN5T016AH-E is a device made using
STMicroelectronics® VIPower® technology,
intended for driving resistive or inductive loads
with one side connected to ground. Active VCC
pin voltage clamp protects the device against low
energy spikes. This device integrates an analog
current sense which delivers a current
proportional to the load current. Fault conditions
such as overload, overtemperature or short to
VCC are reported via the current sense pin.
Output current limitation protects the device in
overload condition. The device latches off in case
of overload or thermal shutdown.
The device is reset by a low level pass on the fault
reset standby pin.
A permanent low level on the inputs and fault
reset standby pin disables all outputs and sets the
device in standby mode.